WM535手柄式电子油门
WM535 Electronic Hand Controls Throttle Assmbly
  The 535 is single-axis hand control with electronic output designed for use in a variety of off-road applications.
  The 535's versatile design allows it to be fitted with diffient contact or non-contact type position senition and different lever arms ,depending on specific cuetomer requirements .The assembly body is molded Nylon 6/6,and features a powder-coated steel lever arm with padded vinyl knob.
  WM352是为各种工程，矿山等非公路用车设计的一种单轴手柄式电子油门。根据客户要求的不同可采取多种设计，产品主体为尼龙6/6成型，操控柄为粉末喷涂，外套一个乙稀把手。

产品特点 Features 
* 产品主体用玻璃纤维填充的尼龙6/6成型   Glass-Filled Molded Nylon 6/6 Body
* 密封标准符合IP67   Environmentally-Sealed to IP67 Specifications
* 钢制操控柄可切换  Interchangeable Steel Lever Arm
* 握紧力可在15-50牛之间调整  Factory-Adjustable Holding Force 15-50牛
* 带螺纹的铜制嵌件方便安装  Threaded Brass Inserts for Mounting
* 设计寿命100K次  Design Life 100K Cycles
* 线束可选配--附操控柄  Optional Cable-Attachment Lever Arm

产品尺寸图 Dimensional Data

规格 Specification
* 尺寸(如图示传感器和操纵杆)

     Height8”(203mm) Width3.5”(89mm) Depth3.0”(76mm)
    Dimensions(with pictured sensor and lever arm)
* 控制手柄转角
    Lever Arm（center of rotation to tip）   6.25”（159mm）
*安装孔   
    Mounting Holes:M8*12.5        Centers:2.75”
* 启动力（大约）
    Actuation Force(typical)    11.3lbs.(50N)@6”(152mm)
* 扭矩（大约）
    Torque(typical)      5.65ft./lbs.(7.66Newton Meter)
* 工作温度
   Operating Temperature: -40°F to 185°F(-40℃to+85℃)